Description
The heated gas sampling probes of the PSG Plus DSBP series are used for the continuous analysis of extractive gases. They allow representative sampling of hot gases with high dust and water vapor content without any problems. Typical applications are process measurements in the cement industry.
The intelligent design with optimal gas guidance allows the filtration of gas samples on the 212 cm2 outer filter surface (the largest on the market) as well as the comfortable and quick filter change without tools and the dismantling of the heated sample line. The extremely simple maintenance of the PSG Plus DSBP is possible thanks to a sophisticated corkscrew mechanism, which also allows effortless opening of the filter housing cover. The holohedral sealed high-performance ring radiator in combination with the thick-walled, tightly-woven glass fibre insulation jacket ensures even heating of the complete PSG Plus DSBP to 180°C. The two-stage rear purge with 12×1 mm tube is controlled by optionally mounted coaxial solenoid valves with a 10 mm passage.
Due to the largest filter surface on the market in combination with the homogeneous heating dust will always be reliably separated in the PSG Plus DSBP without condensation of water vapour and thus without blocking the filter. For high dust concentrations of up to 280 g/m3, the PSG Plus DSBP is equipped with an effective double-stage rear vent with a 10 mm opening, which is unique on the market. In this way, the filter and the filter chamber are thoroughly purged and the dust is almost completely removed in the process. The ceramic filter with a 0.3 µm porosity membrane also supports the high efficiency of the backflush.
Key points:
- Largest active filter area on the market
- Two-stage rear drain with 10 mm passage
- Corrosion resistant stainless steel SS316Ti
- Controlled heating to 180°C
- No cold spots
- Comfortable filter change without tools
- Test gas connection as standard
- Protective housing for outdoor installation
- Temperature alarm contact
- 8-hole flange for variable mounting