Met One’s E-SEQ-FRM sequential dust sampler automatically samples airborne particles. ThisUS-EPA-designated reference device is intended for sampling PM2.5, PM10, PM1, and PM10-2.5. The equipment includes a high-precision volumetric flow controller.
The Met One E-SEQ-FRM features a modular design that makes it easy to disassemble and transport between different sites. Its compact size makes it easy to move indoors or outdoors to hard-to-reach areas.
This sampler can hold up to 16 filter samples with a diameter of 47 mm. A dedicated compartment maintains these filters at a controlled temperature. It can be programmed using a flexible schedule that supports up to 16 independent sampling events. This microprocessor-controlled system operates completely autonomously for more than two weeks without supervision.
An optional communication module provides remote access to data viathe RS232 interface. The instrument logs internal events and features Ethernet and USB ports. Stored data can be retrieved very quickly using a USB flash drive.
For single-event sampling, the series includes the Met One E-FRM-DC manual-change model.
The E-SEQ-FRM automatic sequential dust sampler is available for rent from CleanAir Europe.
| Withdrawal | PM-10 head, independent shut-off regardless of wind speed up to 10 m/s. Optional: PM-2.5, PM-1, or TSP head |
| Flow Rate | 1 m³/h |
| Capacity | 16 filter cartridges, 47 mm filters |
| Volume Flow Control | Via an electronic mass flow controller. Temperature and pressure compensation using internal sensors |
| Sampling Duration | From 0 to 30 days |
| Sampling Range | A programmable sampling cycle that can span several weeks |
| Clarification | +/- 1% over 1 month |
| Closet | Ventilated and heated |
| Filter block | Temperature-controlled by forced ventilation |
| Interface | RS-232 / USB Port / Ethernet |
| Operating temperature | -30°C to 50°C (down to -40°C) |
| Food | 230 VAC |
| Dimensions | 79 x 64 x 40 cm (without head) Height of the PM-10 head: 160 cm min |
| Weight | 27 kg |