A blue globe icon next to the word "CleanAir" in bold blue letters, forming the CleanAir brand logo on a black background.

ASI Model DP-049

Dilution Probe

The DP-049 series in-situ dilution probe conditions and transports your emission gas samples. It first draws a source sample at a flow rate ranging from 20 to 500 ml/min, depending on the orifice. This gas is then mixed with dilution air at ratios ranging from 12:1 to 350:1, providing a reliable diluted flow of 4.5 to 12 L/min to your analyzer.

HIGH-PERFORMANCE IN-SITU DILUTION FOR YOUR HOT AND MOIST GASES

The ASI Model DP-049 perfectly prepares your complex samples for analysis on an ambient-level analyzer. The system filters out particles using coarse and fine separation methods. The gas then passes through a specific critical orifice selected from a variety of materials, such as quartz, standard glass, Monel-400, or 316 stainless steel.

It is then diluted with the carrier gas in the probe’s aspirator. This dilution drastically reduces the humidity to below the dew point of the ambient air. The equipment thus transforms a gas that is initially hot, humid, and sticky into a perfectly stable flow. The sample is transported under positive pressure through an unheated umbilical line to the analyzer over a distance of up to 100 meters.

In the field, the device maintains a vacuum greater than 0.47 bar using engine air pressure. Its rugged design incorporates internal components machined from Inconel-600® to prevent corrosion. The instrument withstands process temperatures up to 400 °C in its standard configuration. The high-temperature versions can even withstand extreme industrial environments up to 540 °C.

We also offer the ASI Model ESP-050 direct-extraction sampling probe.

Filtration Particle Filtration Using Coarse and Fine Filtration Methods
Flow Rate Diluted gas: 4.5 to 12 L/min (adjustable depending on the dilution air)
Precise sampling: 20 to 500 mL/min (via standard orifices)
Dilution Ratio ranging from 12:1 to 350:1 for optimal precision
Empty Stable minimum of 0.47 bar (required air pressure: 2.5 to 6 bar).
Humidity Reducing moisture content to levels below the dew point
Materials in Contact Inconel® 600
Operating temperature Up to 400 °C
High-Temperature Versions: up to 540 °C
Selecting Ports Standard glass, special quartz, Monel-400, and 316 stainless steel
Precise Dilution
Flow rates from 20 to 500 ml/min with adjustable ratios ranging from 12:1 to 350:1.
Modular Design
Wide selection of materials: standard glass, special quartz, Monel-400, or 316 stainless steel.
Robustness
Inconel-600® parts and SilcoTek® coatings for maximum protection.
Simplified Transportation
Signal transmission up to 100 meters via a single, unheated line.
MANUFACTURER'S DOCUMENTATION
EN Technical Data SheetDownload