A blue globe icon next to the word "CleanAir" in bold blue letters, forming the CleanAir brand logo on a black background.

PSG Basic Extruded

Heated Sampling Line

Complies with the EN 60529 standard

The PSG Basic Extruded series offers heated sampling lines designed for continuous extractive gas analysis. They transport humid gas streams from the sampling point to the analyzer while maintaining a stable temperature of up to 200 °C. This technology uses a robust extruded outer jacket and a parallel heating cable to ensure the safe transfer of your samples.

A HEATED SAMPLING LINE TO PRESERVE THE INTEGRITY OF YOUR GASES

The use of PSG Basic Extruded heated lines ensures the integrity of your measurements when transporting moisture-laden gases. By maintaining the temperature above the acid dew point, the equipment prevents condensation from forming. This protection prevents the loss of essential gaseous components in the condensate. The outer jacket, made of TPU, PE, or PVC, offers extreme resistance to weather and flames.

Thanks to its flexible design, the system adapts precisely to the layout of your site. The lines are available in continuous lengths of up to 300 meters. You can adjust them on site in 0.5-meter increments. This modularity simplifies installation over the long distances between the sampling point and the analysis shelter.

The internal configuration supports up to 12 interchangeable tubes made of PTFE, PFA, stainless steel, or special alloys. Thermal fleece or fiberglass insulation protects the flow from ambient temperatures below 0 °C. An integrated PT100 sensor allows the line to be controlled up to 200 °C via an external temperature controller such as the PSG ST49 or the PSG DC10.

Max. temperature 200 °C
Thermal insulation / weight Thermal batting or fiberglass / 1 kg/m
Insulation Thickness 10 mm
Type of heating cable PSG Basic Parallel Heating Cable
Outer sheath 2 mm extruded PVC, PE, or TPU
Outer Diameter 42 mm with an internal diameter of
43 mm with 2 x 6 mm
45 mm with 2 x 8 mm
Radius of curvature
min.
8–10 times the outer diameter
FCT TEMPERATURE From -20 to +65 °C
Max. absolute operating pressure (PTFE line) DN4/6: 5.6 bar
DN6/8: 4.5 bar
Max. absolute operating pressure (stainless steel line) 400 bar
protection IP64
Maximum circuit length 60 m
Power 60 W/m
Electrical Connection 3-meter silicone connection cable, open ends (included)
Food 230V 50/60Hz
120V 50/60Hz (optional)
Thermal Stability
Control temperature up to 200 °C, precisely regulated by an external controller.
Anti-Condensation System
Heated line that ensures gas is transported without any condensation.
Modular Design
Lines up to 300 m long, delivered ready to use or customizable on site in 0.5-meter increments.
High Capacity
Supports up to 12 internal lines simultaneously.
Flexibility
Interchangeable inner tubes are available in PTFE, PFA, stainless steel, or special alloys.
MANUFACTURER'S DOCUMENTATION
EN Technical Data SheetDownload

Recommended Similar Instruments