Description
The Kunak AIR Pro is an air quality monitoring station equipped with smart gas detection cartridges, an optical particle sensor, and sensors for temperature, atmospheric pressure, relative humidity, and dew point. equipped with smart gas detection cartridges, an optical particle sensor, and sensors for temperature, atmospheric pressure, relative humidity, and dew point.
This air quality monitoring station (AQMS) monitors particulate matter and up to five pollutant gases. It can also optionally integrate up to three additional meteorological parameters, such as wind speed and direction, rain, noise, solar radiation, or heat stress.
The Kunak AIR Pro provides continuous, real-time data with performance close to the following reference standards:
– European standard CEN/TS 17660 (achievement of Class 1 OQD)
– EPA/600/R-20/279 protocols, measurements, and target values for O3, EPA/600/R-23/14 for NO2, CO, and SO2, EPA/600/R-20/280 for PM2.5, and EPA/600/R-23/145 for PM10
– Traceable data in accordance with Directive (EU) 2024/2881 and USEPA Regulation 40 CFR Part 53
Autonomy
The Kunak AIR Pro is equipped with a rechargeable lithium battery that can be powered via an indoor or outdoor charger or a solar panel. This monocrystallinephotovoltaic panel offers high efficiency and robustness, designed for prolonged outdoor use thanks to its IP67 protection. It ensures complete autonomy from the electrical grid, allowing the station to be installed in isolated areas.
The station can therefore run on a battery powered by a solar panel, or be plugged into the mains for indoor use.
For outdoor installations with a power supply, a dedicated, compact, lightweight, and waterproof (IP67) charger ensures reliable power for extended outdoor use in any environment.
Kunak AIR Cloud
All Kunak AIR Pro data can be managed 24/7 via the Kunak AIR Cloud platform. Data can be viewed in real time, exported, and also used via API for direct integration into external systems. The Kunak AIR Cloud also allows remote calibration, custom alarm configuration, and report generation, thanks to an intuitive interface.
The Kunak Air range of stations
Kunak air quality monitoring stations are available in two models. The Kunak AIR Liteis an ultra-compact and versatile version, while the Kunak AIR Pro is designed for projects requiring enhanced accuracy and extended integration capabilities.
Each version can accommodate interchangeable smart cartridges to adapt to the requirements of each application.
Available for rent
CleanAir Europe offers the KUNAK AIR Pro for rent with its full range of existing pollutant sensors. It is also possible to connect via Modbus for wired data acquisition in addition to the secure cloud platform.
Smart Cartridges
The modular system for air quality monitoring stations Kunak AIR Lite and Kunak AIR Pro allows the use of a wide range of smart, interchangeable cartridges, making it easy to adapt each configuration to the project and field of application. Each cartridge provides real-time, continuous data, ensuring reliable and accurate air quality monitoring.
| POLLUTANTS |
FEATURES |
 |
Particles |
• Optical particle counter (laser diffraction)
• Measurement ranges:
– PM1: 0–1,000 µg/m³
– PM2.5: 0–2,000 µg/m³
– PM4: 0–2,000 µg/m³
– PM10: 0–10,000 µg/m³
– TSP: 0–15,000 µg/m³
– TPC: 0–8,000 count/cm³ |
 |
Ultrafine particles |
• Electrochemical sensor
• Two measurement ranges are available: 0 to 12,000 ppb or 0 to 500 ppm |
 |
Carbon monoxide (CO) |
• Electrochemical sensor
• Two measurement ranges are available: 0 to 12,000 ppb or 0 to 500 ppm |
 |
Nitrogen monoxide (NO) |
• Electrochemical sensor
•Measurement range: 0–5,000 ppb |
 |
Nitrogen dioxide (NO₂) |
• Electrochemical sensor with integrated O3 filter that eliminates interference from ozone
• Measurement range: 0–5,000 ppb |
 |
Ozone (O3) |
• Electrochemical sensor that detects NO2 and O3 concentrations
• Measurement range: 0–2,000 ppb |
 |
Sulfur dioxide (SO2) |
• Electrochemical sensor
• Measurement range: 0–10,000 ppb |
 |
Hydrogen sulfide (H2S) |
• High-precision electrochemical sensor designed to detect H2S and total reduced sulfur (TRS) compounds, including methanethiol (CH4S)
• Two measurement ranges are available: 0 to 2,000 ppb or 0 to 20 ppm |
 |
Carbon dioxide (CO2) |
• Infrared sensor (NDIR)
• Measurement range: 0–5 ,000 ppm |
 |
Methane (CH4) |
• Two versions available:
– Latest-generation sensor designed for applications requiring high-sensitivity CH₄ monitoring ( 2–300 ppm )
– Tunable diode laser spectrometry (TDLS) sensor with no interference from other gases, water vapor, or dust particles ( 0–1, 000 ppm) |
 |
Volatile organic compounds (VOCs) |
• Photoionization detector (PID)
• Two measurement ranges are available: 0 to 3,000 ppb or 0 to 40 ppm |
 |
Non-methane hydrocarbons (NMHC) |
• Measurement range: 0 to 30 ppb |
 |
Ammonia (NH3) |
• Electrochemical sensor
• Two measurement ranges are available: 0 to 1,500 ppm or 0 to 50 ppm |
 |
Hydrogen chloride (HCl) |
• Electrochemical sensor
• Measurement range: 0 to 20 ppm |
 |
Hydrogen cyanide (HCN) |
• Electrochemical sensor
• Measurement range: 0 to 50 ppm |
 |
Hydrogen fluoride (HF) |
• Electrochemical sensor
• Measurement range: 0 to 10 ppm |
 |
Chlorine & chlorine dioxide (Cl2 – ClO2) |
• Electrochemical sensor
• Measurement range: 0 to 20 ppm |
 |
Oxygen (O2) |
• Electrochemical sensor
• Measurement range: 0 to 20% |
Features
• Température de fonctionnement : de -20 ° C à 60 ° C
• Humidité relative de fonctionnement : de 0 à 99%HR
• Capteurs intégrés : T°/HR/Pression atm./Point de rosée
• Période moyenne : de 10 sec à 24H maximum
• SIM : eSIM et support SIM intégrés
• Alimentation : 0,08-1,2 W (selon la configuration)
• Autonomie : 24/7 via panneau solaire/chargeur
• Batterie : lithium 2.9Ah ou 26Ah
• Communication : multi-bande 2G/3G/4G, modbus RS485 RTU
• Protection ip : IP65
• Étui de protection : PMMA, polycarbonate & inox
• Dimension : 257 x 270 x 225 mm
• Poids : < 3.5 kg
Key points
– Continuously measures particles (PM1, PM2.5, PM4, PM10, TSP), up to 5 gaseous pollutants, and 3 meteorological parameters
– Quick and easy installation and calibration
– Interchangeable cartridges
– Leak detection
– Autonomous operation 24/7 thanks to its integrated 26 Ah lithium battery and solar panel
– Real-time data management via the Kunak cloud
– Lightweight and compact
Applications
– Indoor and outdoor air quality
– Environmental impact studies
– Urban environments
– Fenceline
– Mining
– Odor control
– Leak detection
– Wastewater management
– Landfill monitoring
– Construction and building
– Ports and airports
