Description
Condition: Very good condition
CleanAir Europe offers reconditioned instrument the Thermo Scientific Partisol 2025i sequential particulate matter sampler. It is used for the automatic collection of PM10 or PM2.5 to measure the mass concentration of dust. This instrument is the modernized version of the Partisol Plus 2025.
Both sample streams are collected simultaneously on two 47 mm filters housed in FRM-style molded filter cassettes. The sampler then exchanges each set of two filters according to a user-specific sampling time, for example, a midnight sampler exchanged daily at midnight.
The Thermo Scientific Partisol 2025i is an airborne particle sampler.
It is used to collect PM10 or PM2.5 on 47 mm diameter filters at a regulated flow rate of 1 m3/h to measure the mass concentration of dust.
This automatic dust sampler, PM10 and PM2.5 has been declared the " reference method " in the USA for PM-10 and PM-2.5, and has been certified as equivalent toEN 12341 and EN 14907 in Europe.
CleanAir Europe offers a wide range ofreconditioned instruments, ready for use in various applications.
Features
• Capacity: 16 filter cartridges, filter diameter 47 mm
• Continuous air sampling: PM-10 sampling head, independent of wind speed up to 10 m/s. Optional: PM-2.5, PM-1 or TSP sampling head
• Flow rate: Adjustable from 5 to 18 l/min (Note: to operate in PM mode, the flow rate must be set to 16.67 l/min)
• Volume flow regulation: By electronic mass flow regulator and temperature and pressure correction by internal probes
• Regulation accuracy: +/- 1% over 1 month
• Cabinet: Ventilated and heated
• Filtration unit: Temperature controlled by forced ventilation
• Testing: Automatic leak test
• Sampling autonomy: the sampling cycle is programmable and can extend over several weeks
• Operating temperature: -30°C to 50°C
Size:
- Height: 79 cm (without head)
- Width: 64 cm Depth: 40 cm
- Height of the head PM-10 : 160 cm minimum
Weight : 46 Kilos
Key points
– Filter holder, capacity 16 filters with a diameter of 47 mm
– High-precision volume flow regulator
– Available in Total Dust, PM-10, PM-2.5, or PM-1.0 versions
– Temperature-controlled filter compartment
– Ventilated and heated cabinet usable from -30°C to 50°C
– Microprocessor-controlled sequence with conditional sampling option
– Internal data/event acquisition
– Ethernet, USB, and RS 232 interfaces.
Applications
– Air quality analysis
– Environmental impact studies
