Description
CleanAir Europe offers you the PSG Plus series of heated gas sampling probes for continuous analysis of extraction gases. They enable problem-free, representative sampling of hot gases that are mainly loaded with dust and water vapor. Typical applications include emissions measurement, process monitoring and process optimization.
The intelligent design with optimal gas guidance allows the filtration of gas samples on the 212 cm2 outer filter surface as well as a comfortable and quick filter change without tools and dismantling of the heated sample line. The PSG Plus can be serviced extremely easily thanks to a sophisticated corkscrew mechanism, which also allows effortless opening of the filter housing cover. The holohedral sealed high-performance ring heater in combination with the thick-walled, tightly-woven glass fibre insulation jacket ensures even heating of the complete PSG Plus to 180°C.
Thanks to the largest filter surface on the market, in combination with the homogeneous heating dust, the PSG Plus will always separate the dust reliably without condensation of water vapour and therefore without clogging the filter. For high dust concentrations of up to 40 g/m3 or 280 g/m3 , the PSG Plus can be fitted with an effective single- or two-stage back purge with a 12 mm OD tube, unique on the market. In this way, both the filter chamber (single-stage) and the filter are thoroughly purged. Standard calibration resp. test gas connection enables the PSG Plus to be used in emission measurement systems to EU regulations 2000/76 / EG and 2001/80 / EG.
