Description
The Model DP-060 ASI Series Probe Heater is specially developed for use with the new ASI or existing EPM in situ dilution samplers (dilution probes).
Another simple and inexpensive way to minimize downtime of your CEMS sampling equipment.
- Lighter:
The extension hose assembly will be much lighter as it will use a nominal 3" hose (OD 3-1 / 2 ") instead of the nominal 3-1 / 2 " hose (OD 4 ") as with the EPM 797.561L model. Check out our "Stack Tester" versions, they use a nominal 1-1/2" hose (1.90" OD)! - Compact :
Can fit into smaller stack/identification conduit ports, as the extension ring does not exceed the outer diameter of the extension pipe by 3-1/2". The EPM model has an extension ring with an outer diameter of 5". - Compatible:
Can be used with existing in situ dilution probes regardless of probe flange type, as long as the probe has a newer style filter cap assembly (with a groove for the Kalrez® O-ring at the end of the probe). - Adaptable:
Custom adapters can be produced to attach the heated probe assembly to many existing extension pipe configurations. Also, has three tapped holes on the end face of the external heater mantle, which can be used to attach the particle baffle if desired (custom made by end user or designed by ASI upon request). - Interchangeable:
The heating coils are interchangeable between this heater assembly and the EPM 797.560 series heaters. - Economical:
Whether you're looking for a basic coil replacement or a complete heater package, it costs significantly less than previously available EPM models
Specifications:
- Wetted parts: 316 / 316L stainless steel
- Voltage: 230VAC or 115VAC
- Power: 400W (higher power optional)
- Thermocouple type: type K
- Temperature control: via the temperature controller (by the customer)
- Maximum operating temperature: 300°C
- Shipping weight: 5.4 kg
