Return to the previous page

ETG MCA 100 BIO-P ITEM 546 AMBIENT AIR AND PROCESS

This system is suitable for the measurement of the biogas in a single point, and performs continuous measurement of CH4, CO2,CO, O2 and H2S.

The MCA 100 P is the portable version of the MCA 100 Bio and has been designed for those who need to monitor the composition of the biogas at several points.

The analyzer is mounted inside a hard case impact resistant, equipped with touch screen monitor ( 5.7”), capable of recording up to 1000 data analysis, has an autonomy of 8 hours.

 

CH4, CO and CO2 board NDIR based

 

O2, H2S board electro chemical cell based

 

Specifications

– Ranges :

  • CH4 0…100 vol% (NDIR)
  • CO2 0…50% (NDIR)
  • CO 0…1% (NDIR)
  • O2 0…25 vol% (ECD)
  • H2S 0…5000 ppm (ECD)
  • Calorific Value

– Unit : %, PPM

– Data logging : Yes

– Software : Yes

– Internal pump : Yes

– Analog output : No

– Weigth : 8 kg

– Number of box : 1

– Recommended for use with: 822

Key Points :

– Real-Time analysis

– Remotable by Ethernet

– Trend of the last 30 minutes for each measured compound

– Dust filter on sample line

– Sampling pump

– Data Download .csv format by USB port

 

 

 

AP 360 item 220

This machine measures CO in the open air to determine air quality or to set a zero baseline before building construction work is carried out.
The Horiba AP360 uses NDIR detection.

Specification

– Measurement Range : 0 – 100 ppm
– Units : ppm
– Detection Limit : 0.02 ppm
– Data storage : Yes
– Internal pump : yes
– Analog output : Yes
– Communication interface : yes
– Packaged weight : 20 kg
– Number of packages : 1
– Recommended for use with : 622, 923, 927.

Key PointsPoints clés

– 19’’ rack

42i item 233

This machine can measure NO, NO2 and NOx.
The Thermo 42i uses the principle of chemiluminescence.
It alternately measures NO (directly) and then NOx (via the converter).
It displays the 3 parameters continuously, for NO, NO2 and NOx.
It can be used after a dilution system on a high concentration application (such as emissions).

Specification

– Measurement Range : programmable from 0 – 0.05 ppm to 0 – 100 ppm.
– Units : ppb or mg/m3 programmable
– Detection Limit : 0.4 ppb
– Data storage : 5000 measurement points
– Internal Pump : yes
– Analog Output : yes
– Communication interface : yes
– Software : Yes
– Packaged weight : 28 kg
– Number of packages : 1
– Recommended for use with : 622, 843, 921P, 927.

Key Points

– Menus for setting parameters and optical and electronic diagnostics
– Automatic range switchover
– Fast response time, linearity on all ranges
– Reduced sensitivity to interference
– TCPIP Ethernet Connection

42C item 235

This machine can measure NO, NO2 and NOx.
The Thermo 42C uses the principle of chemiluminescence.
It alternately measures NO (directly) and then NOx (via the converter).
It displays the 3 parameters continuously, for NO, NO2 and NOx.
It can be used after a dilution system on a high concentration application (such as emissions).

Specification

– Measurement Range : programmable from 0 – 0.05 ppm to 0 – 100 ppm.
– Units : ppb or mg/m3 programmable
– Detection Limit : 0.4 ppb
– Data storage : 5000 measurement points
– Internal Pump: yes
– Analog Output : yes
– Communication interface : yes
– Software : Yes
– Packaged weight : 28 kg
– Number of packages : 1
– Recommended for use with : 622, 840, 921, 927.

Key Points

– Menus for setting parameters and optical and electronic diagnostics
– Automatic range switchover
– Fast response time, linearity on all ranges
– Reduced sensitivity to interference
 

AP 360 item 236

This machine measures NOx in the open air to determine air quality or to set a zero baseline before building construction work is carried out.

The Horiba AP360 uses the principle of chemiluminescence.
It can be used after a dilution system on a high concentration application (such as emissions).

 

Specification

– Measurement Range : 0-1000 ppb
– Unit : ppb
– Detection Limit : 0,5 ppb
– Data storage : yes
– Internal Pump: yes
– Analog Output : yes
Communication interface : yes
– Packaged weight : 25 kg
– Number of packages : 1
– Recommended for use with : 622, 921P, 927

AP 360 item 241

This machine measures O3 in the open air to determine air quality or to set a zero baseline before building construction work is carried out.
The Horiba AP360 uses the principle of UV fluorescence.
It can be used after a dilution system on a high concentration application (such as emissions).

Caractéristiques

– Measurement Range : 0-1000 ppb
– Unit : ppb
– Detection Limit : 0,5 ppb
– Data storage : yes
– Internal Pump: yes
– Analog Output : yes
– Communication interface : yes
– Packaged weight : 20 kg
– Number of packages : 1
– Recommended for use with : 622, 927

49i item 243

This machine is used to measure ozone in ambient air.
The Thermo 49i uses the principle of ultraviolet photometric analysis.
It is temperature and pressure compensated.
 

Specification

– Measurement Range : 0 to 100 ppb and 0 to 200 ppm
– Units : ppm, ppb, μg/m3, mg/m3
– Detection Limit : 1 ppb
– Data storage : 5000 measurement points
– Internal Pump : yes
– Analog Output : 0 -10 V
– Communication interface : yes
– Software : yes
– Packaged weight : 28 kg
– Number of packages : 1
– Recommended for use with : 622, 927.
 

Key Points

– Internal ozone generator can be used for self-calibration
– Fast response time
– Optical and electronic diagnostics tools
 

43C item 250

Cet appareil permet de mesurer le SO2.
Le Thermo 43C utilise le principe de la photométrie dans l’ultraviolet. Il possède un dispositif de compensation de température et de pression.
Il peut mesurer le H2S ou TRS après un convertisseur à oxydation thermique.

Caractéristiques

– Gamme de mesure : programmable de 0-1-100ppm
– Seuil de détection : 1 ppb
– Unités : ppb, ppm ou mg/m3 programmable
– Stockage des mesures : 5000 points de mesure
– Pompe interne : oui
– Sortie analogique : 0-10V
– Interface de communication PC : oui
– Logiciel : oui
– Poids emballé : 28 kg
– Nombre de colis : 1
– Conseillé avec articles : 141, 622, 922, 927

Points clés

– Menus de paramétrage et de diagnostics optiques et électroniques
– Commutation automatique d’échelles
– Temps de réponse rapide
– Linéarité sur toutes les échelles
– Susceptibilité réduite aux interférents
– Utiliser du tube PTFE pour limiter les pertes par absorption

E sampler item 263

This machine measures dust levels in ambient air.
The E-Sampler uses both a laser and gravimetric analyzer to monitor aerosols and particles in real time.
It is equipped with a data acquisition unit. Life of the battery (included) is 30 hours.
The device is suitable for taking readings both inside and outside buildings. It also indicates ambient temperature, atmospheric pressure and relative humidity.

Specification

– Measuring Range : 0 – 0.5, 0 – 1, 0 – 10 and 0 – 100 mg/m3 (automatic).
– Unit : mg/m3
– Detection Limit : 1 μg/m3
– Sampling Flow-rate : from 1 to 3.5 l/min, temperature and pressure compensated.
– Sampling Period : 1 s
– Accuracy : 3 μg/m3 or 2% of the reading
– Analysis Filter : 47 mm
– Ambient Temperature : -30 to +50 °C
– Atmospheric Pressure : 600 to 1040 hPa
– Data storage : 10,000 readings.
– Internal Pump : yes
– Communication interface : yes
– Software : yes
– Packaged weight : 25 kg
– Number of packages : 2

 

Key Points

– Auto zero and self-calibration (concealable filter) programmable from 15 min to 24 hours

Skypost item 266

The machine measures dust levels in ambient air.
The sampler can be fitted with a PM10 and PM2.5 cyclone separator.
Dust is removed onto a filter. Measuring sequences are programmable.
The electronic flow controller enables measurements to be performed continuously without operator intervention. Filters can also be easily replaced without interrupting sampling.

Specification

– Internal Pump : yes
– Air Flow : 10 – 50 l/min
– Measuring Sequence :programmable
– Multiple sequences
– Filter Diameter : 47 mm
– Capacity for 16 filters
– Communication interface  : yes
– Power Supply : 230V
– Packaged weight : 50 kg
– Number of packages : 2

 

Key Points

– Automatic flow control
– Adjustable support legs